AR15 Bolt Disassembly Jig

AR15 Bolt Disassembly Jig

Designed to work for 223/5.56/300 Blackout bolts and similar cartridges. Fully 3d printed jig and screw securely holds your bolt in place for replacing, repairing, and cleaning. Screw relieves tension on ejector for easy pin removal or insertion. As an added easter egg, jig and screw threads are 5/8x24.

Your bolt manufacturer will probably recommend replacing your bolt roll pins with new ones once they have been removed. This is a good best practice to ensure a tight fit on the pins, unless you have some kind of multi-use spiral pin or similar. But I'm not your dad, so do what you want (just remember I told you so when your old roll pins walk out and gouge the chrome inside your bolt carrier.. ask me how I know).

To install your bolt in this jig, just align extractor and ejector pins with matching holes in jig and seat into the locking lug cutouts. Turn in the screw until it's nice and snug against the bolt face, and you're in business.

3D printed out of PLA for strength. I do not recommend leaving this in hot places, like your car on a hot summer day, as PLA will start to get soft at those temperatures.